Rubber sheeting general informations

Items Catalogue

General Information

The various types of sheet shown in this catalogue are particularly suitable for a wide range of technical applications in industry.

APPLICATIONS

The figures stated refer to the average results of statistical assessments.

PHYSICAL AND MECHANICAL
PROPERTIES

This catalogue shows the most common conditions of use depending on the basic elastomers, their properties and laboratory assessments made under standard conditions.

THERMAL AND CHEMICAL PROPERTIES

The sheets are made either all rubber or with nylon or polyester inserts.

TEXTILE INSERTS

The surface is usually smooth but one or both sides can be made with a canvas-type print on request.

SURFACE FINISH

for thicknesses up to 10 mm:
width 1.500 mm length 10.000 mm
for thicknesses of 12 to 20 mm:
width 1.050 mm length 10.000 mm
for thicknesses of 25 to 30 mm:
width 1.050 mm length 5.000 mm
for thicknesses of over 25 mm:
plate sizes 1.030 mm x 1.030 mm

DIMENSIONS

width +/- 30 mm
length -0 + 400 mm
thickness up to 1.5 mm +/- 0,2 mm
thickness up to 2,0 - 3,0 +/- 0,3 mm
thickness up to 4,0 - 6,0 mm +/- 0,5 mm
thickness up to 8,0 mm +/- 0,8 mm
thickness up to 10,0 - 15,0 mm +/- 1,0 mm
thickness up to over 15,0 mm +/- 2,0 mm

DIMENSIONAL TOLERANCES

TOVO GOMMA have their own laboratory for the research and development of various products and for designing costomised products.

TECHNICAL BACKUP

Items Catalogue

TOVOgomma